Can you transport a top loader washing machine on its side? (2024)

Can you transport a top loader washing machine on its side?

It's recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.

(Video) How To Transport a Washing Machine By Yourself
Can you move a top load washer on its side?

When you move your washer, first replace the shipping bolts that were originally in the back of the washer. This keeps the drum from moving inside the washer and protects it from damage. Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it.

(Video) What are transit bolts? why are they there and what should I do with them?
(Appliances Online Australia)
Is it OK to transport a washing machine lying down?

Like a refrigerator (also a household equipment), it's recommended you move a washing machine stood upright. If extreme conditions don't permit, transport it laid on either of the sides which don't have protruding water pipes.

(Video) Unloading a washer from a car, alone
(Matthias random stuff)
Can you transport a washing machine in a car?

Transporting a washing machine by vehicle

The likelihood is that your washing machine will not fit comfortably in your car. Especially if it is still secured upright, which it always should be. In this case, it is often advisable to enlist the help of professional couriers.

(Video) How To Load your Washer, Dryer, Range, or Dishwasher!
(Appliance Factory & Mattress Kingdom)
How do you transport a top loader?

6 Best Tips on How to Move a Washing Machine – Moving Washing Machines
  1. Empty your washing machine and thoroughly clean the inside.
  2. Turn off the water and power supplies, and unplug.
  3. Unfasten the water supply hose and detach the valves.
  4. Install washing machine transit bolts.
  5. Manoeuvre your machine onto a trolley.
Jul 14, 2019

(Video) Easy Trick to Move Your Washer or Dryer without Hurting Your Back!
(Washer Dryer Repair Tips & Tricks for DIY 'ers)
How do you stabilize a top load washer for moving?

Preventing a washing machine's drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.

(Video) LifeHack: How to move washer and dryer in a minivan by oneself
Do washing machines need to be drained before moving?

Step-by-step guide for moving a washing machine

Empty the washing machine of any clothes or other items. Drain any leftover water from the drainage area (see below for more). Disconnect the washing machine from the power outlet and the water supply (make sure they're both turned off before you do this).

(Video) [LG Top Load Washers] How To Properly Load Your Top Load Washer
(LG USA Support)
Will a washer fit in an SUV?

Can a washing machine fit in an SUV? A standard-sized washing machine will fit in some SUVs, as long as you fold down or remove the back seats first. To make sure the washing machine will fit in your vehicle, first measure the appliance and the cargo hold of your SUV.

(Video) Normal Basket Movement on Top Load Washers
(W Service)
Can I move a washing machine with a hand truck?

How to move a washing machine easily? Use washing machine transit bolts before moving the washer upstairs or downstairs. These washers' drum stabilizer are 100% required. Use a dolly or a appliance hand-truck if you have one.

(Video) Appliance rollers to move heavy appliances without breaking your back
Can a dryer be transported on its side?

It is not recommended to lay the dryer on its side or back during transporting. Exception: Spacemaker Unitized washer/dryer models should only be transported / moved in an upright position. Do not lay these models on their side or back.

(Video) How to Move A Washer Using a Dolly
(Appliance Factory & Mattress Kingdom)

Can one person lift a washing machine?

You should always lift a washing machine with 2 people. First, decide who is will be holding the top and who will be holding the bottom of the washing machine.

(Video) putting locking nuts on washing machine before transport
Do top load washers have shipping bolts?

Top-load washers are shipped with one of three types of ways to keep the tub stable during transport and installation: Shipping rod (prior to 2013) Styrofoam at the top of the tub opening (2013 and newer) Cardboard cone under the washer (2015 and newer)

Can you transport a top loader washing machine on its side? (2024)
How do you transport a washer and dryer?

Don't move your washer and dryer without a moving dolly and ratchet straps. It's a step worth repeating. If you're moving a washer or dryer, it's imperative you use a moving dolly and ratchet straps for both. These are large, heavy, and awkward items that require the most secure moving techniques to avoid any accidents ...

How tight can you pack a washing machine?

If you're packing the clothes in tight, that's your first clue that you're overloading your washer. Machines vary, so check your manual, but a good rule is to loosely load the clothes and leave at least 6 inches between the top of the load of laundry and the top of the drum.

What happens if you leave transit bolts in washing machine?

The shipping bolts clamp the spring suspension system into a locked position and hence prevent it from being damaged during transit. If you don't remove them, it will have no suspension system so will vibrate VERY badly when you run it.

What do you do with top loaders?

What Are Toploaders? Toploaders are durable, rigid or semi-rigid plastic card cases that are engineered to enclose trading cards in order to keep them clean and protected from the elements while preventing most types of damage.

Why does my top load washing machine wobble when spinning?

When the wash basket is filled too high due to overloading, the washing machine can shake during the cycle. Running a single large, bulky item or one that is highly absorbent through a cycle can also throw the washer off balance and cause shaking.

Do top load washers shake less?

Front-load washers cause more vibration than top-load machines. That's partly because they spin faster, which helps save energy needed to dry the clothes, and because the direction of the spin adds vibration.

Can I put plywood under washing machine?

Various ways to create floor support

putting a slab of concrete underneath your washing machine. plywood does not work for you, you may also consider using heavy rubber mats. Rubber mats are well equipped to absorb vibrations as well as fix the levelling of your floor.

How do you wrap a washing machine for transport?

You can secure the door shut with tape or rope. You might want to wrap the appliance in bubble wrap, a blanket, or anything to absorb shocks it may suffer during the move. Secure the appliance to the trolley or truck it's going travel in with heavy-duty ropes.

How do you secure a washing machine drum for transport?

Install washer locks or foam: Refer to your owner's manual for help securing the drum during the move. Top-loading machines may simply require you to wedge cardboard or foam between the drum and the case. Front-loaders are often secured by inserting shipping bolts in the rear of the machine.

Should I keep washing machine transit bolts?

The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.

Can you transport a brand new washing machine on its side?

It's recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension.

Where should a washing machine drain to?

The drain hose will come attached to your washing machine and should feed into either a nearby sink or a standpipe. If you are feeding the drain hose into a sink, attach a plastic hose guide to keep the hose bent downward into the sink without kinking.

How long should washer dry before moving?

It is very important that you leave the washer door open for at least 24 hours after disconnecting the water supply (see step two). You should ensure that your washer is completely dry and free of moisture, to prevent mold.

Popular posts
Latest Posts
Article information

Author: Rob Wisoky

Last Updated: 09/04/2024

Views: 6492

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Rob Wisoky

Birthday: 1994-09-30

Address: 5789 Michel Vista, West Domenic, OR 80464-9452

Phone: +97313824072371

Job: Education Orchestrator

Hobby: Lockpicking, Crocheting, Baton twirling, Video gaming, Jogging, Whittling, Model building

Introduction: My name is Rob Wisoky, I am a smiling, helpful, encouraging, zealous, energetic, faithful, fantastic person who loves writing and wants to share my knowledge and understanding with you.