What is the best way to clean cloudy plastic?
Use a vinegar and water mixture.
Place your foggy plastic items in the water, and let them soak for one hour. Scrub the plastic items with a damp rag until they become clear. Rinse the no longer foggy plastic in the sink under warm water. Dry with a soft cloth.
We suggest using cleaning wipes with at least 70% alcohol, hydrogen peroxide, bleach, isopropyl alcohol or ethyl alcohol, or other acrylic approved disinfectants. Use a microfiber cloth in order to avoid leaving scratches in your plexiglass panels, which would give harmful bacteria more nooks to hide away in and grow.
To clean your vinyl or Eisenglass windows or enclosures your best friends are fresh water, a gentle soap and a good microfiber cloth or synthetic chamois. Always thoroughly rinse your vinyl windows with water to remove any salt or other minerals, followed by a mild soap and dry with a soft cloth or microfiber.
- Mix 1 cup vinegar to 4 cups hot water.
- Use a spritzer bottle to spray on the uPVC.
- Leave this for 10 minutes.
- Use a clean dry cloth to wipe down.
If you have concerns about using bleach in your containers, vinegar is a great alternative that is food-safe. Lemon, vinegar, and baking soda are all natural cleaners that will lift discoloration from plastic. Vinegar even provides various benefits in foods, such as improved digestion.
Plastic films used as anti-glare coatings on computer monitor screens can be especially sensitive to even mild alcohol dilutions. The alcohol cleaner will usually cause the anti-glare film to turn cloudy, rendering the monitor unusable.
To get rid of grout haze on porcelain or ceramic tiles, use a vinegar solution. In a big spray bottle or bucket, combine one part white vinegar with four parts water. For enhanced strength, more vinegar can be used. Use a mop or a soft nylon pad depending on the surface you need to clean.
There are a couple of different ways to clean your exterior vinyl windows; however, a safe route for a clean and non-abrasive cleaning solution is the old fashioned vinegar and water. Vinegar is a great all-purpose cleaner for almost any housekeeping project.
And, because vinyl resists any penetrating stains and dirt, you don't have to worry about scrubbing hard, anyway. All you have to do is use warm water, mild detergent, and a soft cloth or sponge to wipe up any unwanted particles. Or try Mr. Clean Durafoam Magic Eraser for stubborn marks.
The white discoloration you are seeing is the clay that is in all car polishes. Use mineral spirits for removing the white residue left behind on plastic trim. Car polishes and waxes contain a cleaner that will leave a haze on plastic trim.
Does Dawn clean plexiglass?
Plexiglass is sensitive to ammonia, high pH, and products with Quaternary ammonium salts that will cause clouding or fogging. Always check your labels before using them on plexiglass. I've always found household dish soap works wonders. I've always preferred Dawn dish soap, but almost any will do.
If you've got a can of WD-40 Multi-Use Product in the garage, your plastic-cleaning problems are solved. Simply spray onto the area you want to clean and scrub a little with a rag until the plastic surface looks clean. As an added bonus, you can also use WD-40 to polish plastic surfaces on your car.
A mixture of five cups of vinegar and one gallon of hot water can be applied via a spray bottle onto the affected area. Long-handled, soft-bristled cleaning brushes help to remove the oxidation. Continuing this manner in small sections works best so the solution does not dry out.
Try 1/2 and 1/2 vinegar with water and soak for 20 min. Then rub (soft cloth) rinse and dry. Should work. Olive oil will take it all off with a dry cloth or q-tip after a few applications.
If you've got a can of WD-40 Multi-Use Product in the garage, your plastic-cleaning problems are solved. Simply spray onto the area you want to clean and scrub a little with a rag until the plastic surface looks clean. As an added bonus, you can also use WD-40 to polish plastic surfaces on your car.